Browse
www.lintels.co.uk
Please set a branch location
UK’s No.1 Lintels supplier
Free Delivery on Orders over £75 exVAT
Guaranteed Availability
Guaranteed Availability

Lintels for Curves (Curved-on-Plan)

 

Harvey Steel Lintels have dedicated sections designed specifically for curved-on-plan applications, to suit most common wall sections.

They have also published a load capacity guide to assist designers with selecting an appropriate section for the application.

Note that depending on the angle of curvature, these lintels frequently require one or more posts for support, otherwise they may over balance - check will their technical department if unsure.

Harvey Steel Lintels are not limited to simple radii either; they can manufacture curves of any shape and direction, including straight sections.
Be sure curved lintels are adequately support by posts, cantilevered bearings or support from above as required.

 

Click here for Harvey Steel Lintel's 3-page Lintels for Curves Guide and order form 

Curved Lintel

 


Placeholder Image
'RS' SECTION CURVED LINTELS

Simple support for shorter spans, or for longer spans if the lintel can be restrained against twisting along it's length.
Don't forget to allow for a gap between the lintel and the masonry on tighter curves.
RANGE APPLICATION
RS17 Height 174mm, Standard Duty, 4.0mm steel
RS21 Height 211mm, Medium Duty, 6.0mm steel
   

Placeholder Image
'RSH' SECTION CURVED LINTELS

Our Heavy Duty lintel for either single or double leaf masonry applications.
RANGE APPLICATION
RSH17 Height 174mm, Very Heavy Duty, 6.0mm steel
Note: The inner is usually a rolled mild steel 160x80 RHS with a stainless soffit, so you still have the benefit of stainless steel exposed, with the low cost & short lead time of mild steel RHS. We can also offer a stainless steel box on request where the application requires, but lead time is longer (can be 3-6 weeks) and cost is greater than for mild steel.

Placeholder Image
'RD' SECTION CURVED LINTELS

Standard lintels for double leaf masonry walls.
Don't forget to allow extra room for the lintel web in the masonry on tigher curves.
RANGE APPLICATION
RD17 Height 174mm, Standard Duty, 4.0mm steel
RD21 Height 206mm, Medium Duty, 6.0mm steel
   

Placeholder Image
'RC' SECTION CURVED LINTELS

Standard lintels for curved cavity walls. They are insulated as standard, and constructed of all stainless steel.
RANGE APPLICATION
RC16 Height 166mm, Standard Duty, 3.0mm steel
RC22 height 2mm, Medium Duty, 4.0mm steel
RC23 Height 232mm, Heavy Duty, 6.0mm steel

Placeholder Image
'RCH' SECTION CURVED LINTELS

Our Heavy Duty lintel for curved cavity walls.
RANGE APPLICATION
RCH17 Height 174mm, Very Heavy Duty, 6.0mm steel
Note: The center RHS may be either stainless or mild steel. Mild steel is usually preferred for its lower cost and shorter lead time whilst still offering the benefit of stainless steel on the exposed soffit. We can also offer a fabricated stainless steel box on request.

We use cookies to help give you the best experience on our website. If you continue without changing your settings, we'll assume that you are happy to receive all cookies on the website. However, you can read our Cookie Policy here.

Accept and Continue